Resin flooring contractors Mold food producers, kitchens and workshop occupiers rely on for floors that pass an audit and go back into service quickly. Supporting production, light industrial and commercial premises across Bromfield Industrial Estate, Mold Business Park and the A541 and A5119 corridors.
Working for national manufacturers, logistics operators and public sector estates since 1999.
As resin flooring contractors Mold occupiers call on regularly, we answer a smaller-grained brief than the heavy towns around it. Mold is the county town of Flintshire, inland on the A494 and A541 where the Alyn valley opens, with the A55 reachable at Northop.
Food production and preparation lead the demand. What decides whether those floors succeed is not compressive strength, it is the detailing: seamless surfaces, coved skirtings, correct falls to drainage and resistance to hot washdown. An auditor looks at junctions and drainage long before anyone asks what the system is called.
Around that sits a light industrial and workshop base on the town’s estates, and a public-facing layer of retail, hospitality, civic and education premises that the big-industry towns nearby simply do not have in the same proportion.
The principal industrial estate, with light industrial, food-related, workshop and storage units.
Business, light industrial and commercial units on the Wrexham Road side of the town.
Smaller industrial, trade and service units along the western approach into the town.
Industrial, storage and trade units linking the town to the Deeside corridor and Buckley.
Heavy materials and cement-related activity with rail freight capacity to the south east.
Retail, hospitality and livestock market premises with kitchen and washdown floors.
Seamless, coved, thermal-shock resistant finishes with correct falls to drainage.
Hot washdown, grease and slip risk handled inside very short installation windows.
Oils, coolants, dropped tools and abrasion along the main internal stock routes.
Seamlessness for disease control, washdown resistance and reliable drainage detail.
Thermal cycling, condensation and systems able to cure at low temperatures.
Colour contrast at thresholds, cleanability and appearance alongside measured grip.
Hygiene audits do not fail on the name of the resin. They fail at the junction between floor and wall, at a drain with no fall running to it, and at a seam that has opened up. Those are specification decisions, and they are made before anything is mixed.
Coved skirtings and sealed junctions remove the corner where residue collects and cleaning cannot reach it.
Drainage falls sized for the volume actually washed down, so an area drains rather than holds water.
Steam and hot water cycle the floor thermally, which is why polyurethane leads in production areas.
Most occupiers here run from one site and cannot stop. A producer cannot pause a run for a week and a kitchen cannot close for one, so return to service is frequently the deciding specification factor rather than a scheduling detail.
That is where rapid-cure systems earn their cost. Polyaspartic returns a floor to use in a few hours and MMA faster still where the window is genuinely extreme, and we state their compromises plainly rather than presenting cure speed as free.
Work is taken overnight, at weekends or zone by zone so the rest of the unit keeps running. Preparation goes under H-class extraction with areas screened, because dust cannot be allowed anywhere near food production or a public building that opens the next day.
Seamless finishes, coved skirtings and falls to drainage across production, preparation and kitchens.
Pendulum values in the wet condition for kitchens, washdown areas and public entrances alike.
BS 8204-6 and EN 13813 classify the build-up, with polyurethane leading where hot washdown occurs.
Equality Act contrast at thresholds, with Welsh-language wayfinding across civic and public premises.
FeRFA classifies resin flooring into eight types by build-up and thickness, and BS 8204-6 governs which one a floor actually needs, with EN 13813 covering the screed material. Polyaspartic and MMA sit outside that classification because they describe the resin chemistry rather than the build-up, and in Mold they are chosen for return to service rather than for performance.
FeRFA Type 1. Two or more coats up to 150 microns, binding a dusting substrate and giving a cleanable surface. From £8 per square metre.
FeRFA Type 2. Dual component to 300 microns, solvent free, in gloss, matt or silk. Chemical resistance with a decorative finish.
FeRFA Type 3. Up to 1000 microns over prepared concrete and the system specified on most industrial jobs. Takes colour well for demarcation.
FeRFA Type 4. Multi-coat build at 1 to 3mm with aggregate broadcast between coats, for impact and constant wear.
FeRFA Type 5. Flow-applied at 2 to 3mm for a seamless finish where hygiene and cleaning matter more than impact resistance.
FeRFA Type 7. Three part filled system at 4 to 6mm thickness, giving a self-smoothing finish for heavy and very heavy duty areas.
FeRFA Types 7 and 8. Trowel-applied at 6 to 9mm to take thermal shock, steam cleaning and constant heavy forklift traffic.
Cures at temperatures down to −5°C and is ready in around two hours. Installed overnight or at a weekend it can remove the need to shutdown entirely.
Cures in hours, but the odour can taint food, fabrics and stock and the area must be cleared and ventilated. Better suited to new build and refurbishment projects.
Rates run from £8 per square metre for a floor seal to £45 for MMA, inclusive of preparation, labour and materials. Where a unit can only close overnight, the faster system is frequently the cheaper project once lost production is counted.
| System | FeRFA | Thickness | Per m² |
|---|---|---|---|
| Floor Seal | Type 1 | Up to 150µm | From £8 |
| Epoxy and PU Coating | Type 2 | 150 – 300µm | £8 – £12 |
| High Build Coating | Type 3 | 300 – 1000µm | £8 – £12 |
| Multi-Layer Flooring | Type 4 | 1 – 3mm | £12 – £16 |
| Self-Smoothing | Type 5 | 2 – 4mm | £20 – £30 |
| Heavy Duty Flowable | Type 7 | 4 – 6mm | £25 – £35 |
| Heavy Duty PU Screed | Type 8 | 6 – 9mm | £30 – £40 |
| Polyaspartic | Chemistry | 300 – 500µm | £38 |
| MMA | Chemistry | 2 – 6mm | £45 |
Inclusive of preparation, labour and materials. Rates assume a sound, accessible substrate and are indicative until the floor has been surveyed. Polyaspartic and MMA sit outside the FeRFA type classification because they describe the resin chemistry rather than the build-up.
A three day shutdown at a plant turning over £2,000 an hour is £120,000 of lost output. On most sites that is several times the price of the floor.
Five contractors quoted one timber processing plant. All five proposed the same system and a three to four day closure. None of them costed the closure.
We proposed a faster-curing system installed across a weekend. A higher rate per square metre, and no shutdown at all. On the client’s own figures the avoided losses exceeded the price of the floor.
We install evenings, weekends and one bay at a time.
Whether a shutdown costs you thousands an hour or simply gets in the way, you do not always have to close your site for a resin flooring installation.
Forming coved skirtings, falls and channel detail so an area cleans down and drains properly.
Walkways, traffic routes and wayfinding in resin, with Welsh-language marking where required.
Damp proof membrane where a substrate fails moisture testing, as a standalone package.
Seamless coved systems laid to correct falls and handed back ready for a hygiene audit.
Thermal shock resistant floors installed overnight so service resumes the following day.
Oil resistant, sealed finishes phased zone by zone so the unit keeps working throughout.
We work across the town and the surrounding area regularly, from Bromfield Industrial Estate and Mold Business Park through to the A541 and A5119 corridors and the Padeswood side. We are based in the North West of England and reach Flintshire directly along the A55 and A494, so a survey usually happens within days at no mobilisation charge.
Seamless surfaces, coved skirtings at wall and plinth junctions, correct falls to drainage and sealed penetrations. Audits fail at the junction, at a drain nothing runs to, or at an open seam, rather than on the product name. Those are specification decisions made before anything is mixed.
Almost certainly thermal shock. Steam cleaning and hot water cycle the floor through large temperature swings while the concrete beneath stays cold, and the two move at different rates. Polyurethane is formulated to absorb that cycling, which is why it leads in production and kitchen areas.
Yes, and it is normal here. Rapid-cure systems return a floor to use in a few hours, with MMA faster still where the window is extreme. They carry compromises in odour and cost which we will set out plainly, but return to service is often the factor that decides the specification.
Yes. Walkways, traffic routes, hazard zones and wayfinding are applied in resin rather than tape, and bilingual marking can be included where a site or a public authority requires it. That comes up most often in civic, education and public-facing premises in the county town.
From £8 per square metre for a floor seal up to £45 for MMA, inclusive of preparation, labour and materials. Hygienic production floors sit in the middle of that range and rapid-cure systems at the upper end. The full table by system is on the cost page.
Tell us what the area produces, how it is cleaned down and how long it can be closed. We attend, test the substrate, and put a written specification and a fixed price in front of you at no cost.
